Safety 2.3. Precautions for maintenance Handling of pressure accumulators Danger of injury! Pressure accumulators are filled with highly pressurised nitrogen. Do not open or damage pressure accumulators. Immediately inform your Komatsu dealer, if you detect mal- functions or defects of pressure accumulators. Filling pressure accumulators with gas or topping up gas in pressure accumulators is strictly limited to persons authorised to handle highly pressurised gas. Do not hit against the pressure accumulator. Keep naked light and sources of heat away from pressure accumulators. Do not drill holes into the pressure accumulator. Do not weld parts to the pressure accumulator.
The service technicians must depressurise the hydraulic sys- tem before they can remove the pressure accumulators. The service technician must let the gas escape before they can disassemble the pressure accumulator. Have the gas pressure of the pressure accumulators checked either every 1,000 operating hours or once every year. NOTE In countries with a hot climate, the responsible Komatsu dealer must check the gas-pressure of the pressure reservoir already every 650 hours. Fan and belts Always keep sufficient distance from rotating parts and pay attention that nothing gets within the operating range of rotat- ing parts.
There is danger that parts getting caught by the fan or the belt are cut off or hurled away. Do not wear loose clothing, neckerchiefs or the like, or open, long hair that might get caught. 2-27 WARNING WARNING