Komatsu — 6. Engine oil pressure warning lamp

Operation 3.2. Description of the individual elements 4. Engine oil level warning lamp This warns the operator that the oil level in the engine oil pan has dropped. During pre-start checks: If the oil level in the engine oil pan is low, the warning lamp and the central CHECK lamp will flash. In this case, check the oil level in the engine oil pan and add oil. In operation: Even if the engine oil level warning lamp is flashing during the pre-start check, it will go out after starting the engine. A0060990 5. Brake oil pressure warning lamp This warns the operator that the brake oil pressure has dropped. During pre-start checks:

When the engine is stopped, the brake oil pressure circuit is not actuated, so that the warning lamp and the central CHECK lamp are also off. In operation: If the brake oil pressure drops, the warning lamp and the central CAUTION lamp will flash, and the alarm buzzer will sound inter- mittently. In this case, stop the engine immediately and check the brake oil pressure circuit. NOTE The warning lamp may flash and go out approx. 10 seconds after the engine is started. This is because pressure is being stored in the brake accumulator. It does not indicate any mal- function. 6. Engine oil pressure warning lamp This warns the operator that the lubricating oil pressure of the engine has dropped.

If it flashes, stop the engine and check. Pre-start check: Lamp is lit. Engine started or running: When the engine is started, the lubrication pressure is formed and the lamp goes out. If the engine lubrication pressure drops during operation, the warning lamp and the central CAUTION lamp will flash, and the buzzer will sound intermittently. 3-9