Komatsu — Boom actuation – boom control lever (1)

3.2. Description of the individual elements Operation 6. Boom control lever The working attachment is controlled using the boom control lever (1) and the bucket control lever (2). 1 2 GK100670 GK100671 Boom actuation – boom control lever (1) 1 1 Raise 2 3 2 Hold The boom is held in the set position. 4 3 Lower AE061370 4 Float position The lever is locked in this position. The boom moves freely under exter- nal force. 1 If the control lever is pulled up further from the raise position it is locked into this position. Once the boom reaches the pre-set switch-off position, the lever returns to the hold position. 3 NOTE Do not use the float position (FLOAT) to lower the bucket. 4 AE061380 3-30