Komatsu — 5. Temperature control switch

Operation 3.2. Description of the individual elements 3. Mode selector switches These are used to select the vents. The following five vent modes are available: FACE, FACE/FOOT, FOOT, FOOT/DEF, DEF. After pressing one of these switches, the indicator lamp above lights up to display the vent mode. A0061560 4. Fresh/recirc selector switch This switch is used to select between recirculating the air inside the cab or taking in fresh air from outside. When the RECIRC position is selected, the indicator lamp above the switch lights up. When the switch is re-pressed, the indicator lamp goes out, and fresh air is taken in. 5.

Temperature control switch The temperature can be adjusted without steps from low to high. The temperature level indicator lamps (6) light up to indicate the temperature of the air coming from the vents. The more the blue lamps light up, the lower the temperature. The colour of the indicator lamp changes while the switch is being pressed. When the temperature reaches the desired level, release the switch to set the temperature. A0061580 The settings for each mode are retained in memory even when the starting switch is turned OFF. However, in the following cases, the setting are to be redone:

When the machine has been out of use for more than 7 days When the battery voltage is extremely low When there has been abnormal interference from outside When the fan switch is turned OFF (the setting is not kept in memory with only the air conditioner switch active) NOTE If the air conditioner is used together with the FRESH posi- tion, the inside of the cab will be pressurized and this will prevent the entry of dust. The higher the position of the fan switch, the more effective the pressurizing. 3-39 A0061570 A0061570