Toyota — Structure

1-8 Structure The flame-proof resin that is light and oil resistant is used for the main body of the closed ventilator. For the oil separate part, element-less type, which is maintenance-free, is adopted. To separate the oil mist in the blowby gas, there is a slewing part for the centrifugation and a filtering part for crash and separation inside. Also there is a PCV valve to adjust the inner pressure of the crankcase. On the body side, there are two ports. The upper port is for pumping out, linking to the intake-pipe, and the lower port is for intaking the blowby of the engine.

Also on the under side of the body, there is a port to separate the oil mist included in the blowby gas and drain the liquefied oil. Concerning operation, when engine starts, negative pressure is generated in the intake-pipe, and the PCV valve sucks the blowby gas in the intake-pipe with adjusting the pressure inside the crankcase. At this time, the oil mist in the blowby gas is liquefied through centrifugation with slewing and crash and separation with filtering, and is returned to the oil pan. Blowby gas Blowby gas flow インテーク Revolving part Filtering PCV valve Oil drain