High beam pilot lamp High beam pilot lamp (4) (4) ① This lamp works when the illuminating direction is upward. ② This lamp comes ON when the dimmer switch is operated, e.g., when passing another vehicle. 77073CD12 Preheat pilot lamp Preheat pilot lamp (5) (5) ① This lamp lights ON when start switch is turned clockwise to the ON position. Light will turn off after approximately 5~45 sec- onds, depending on engine temperature, indicating that preheat- ing is completed. ② When the lamp goes out the operator should start cranking the engine. 77073CD14 Parking brake pilot lamp Parking brake pilot lamp (6) (6) ① When the parking brake is actuated, the lamp lights ON.
Check the lamp is OFF before driving. Check the lamp is OFF before driving. 77073CD13 Maintenance pilot lamp Maintenance pilot lamp (7) (7) ① This lamp will be ON when the consuming parts are needed to change or replace. It means that the change or replace- ment interval of the consuming parts remains below 30 hours. Check the message in maintenance information of the moni- tor menu. Also, this lamp lights ON for 3 minutes when the start switch is ON position. ② 75793CD32 Clutch cut off pilot lamp Clutch cut off pilot lamp (8) (8) ① This lamp lights ON when the clutch cut off mode switch is positioned L, M, H. Refer Refer to page 7-46. to page 7-46. 77073CD65 7-27