. MAINTENANCE SERVICE PROCEDURE REPLACING ELEMENT of the air cleaner body, cover (3) and 4 - 20 1. Open th e top c over at the f ront o f the e ngine side c over on right sid e of th e machine. 2. Remove three clips (2 ), then rem ove c over ( 3). 3. Remove outer eleme nt (4) Do not r emove inner element (5 ) at this time 4. evacuat or valv 5. Remove inner eleme nt (5) , then install a new inne r elemen t immediately. 6. Fit new outer e lement (4), replac e O-rin g (7) with a new pa rt, install cover (3), then 7. Press th e dust indicat or button to return the y ellow piston to original positio 8. Close t he top cover a t the front of the engin e side cover o n the right side of the ma