Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

7.2 REMOVAL OF THE COLD BOOST PIPE (CHARGE AIR PIPE) 7.2 REMOVAL OF THE COLD BOOST PIPE (CHARGE AIR PIPE) Remove the cold boost pipe (charge air pipe) as follows: 1. Remove mixer pipe. 2. Disconnect sensor harness. 3. Remove Charge Air Cooler (CAC) hose clamp at the CAC. 4. Remove the four bolts securing the cold boost pipe to the intake manifold. 5. Remove two bolts at cold boost pipe bracket on oil module. 6. Remove the cold boost pipe. 7. If the Intake Throttle Valve is required to be removed from the Cold Boost Pipe, refer to section . All information subject to change without notice. 7-4 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION