Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 11.1 DESCRIPTION AND OPERATION OF TURBOCHARGER AND RELATED PARTS Compression of air in the turbocharger causes an air mass to flow into the combustion chamber. The turbocharger consists of a turbine and a compressor which are attached to a shaft. The exhaust gas flows to the turbine wheel and causes it to turn. This turning motion is transmitted to the shaft and the compressor impeller. The intake air from the air filter is compressed by the compressor impeller and flows over a charge air pipe to the charge air cooler.

The compressed air is cooled in the charge air cooler, permitting a more dense charge of air to be delivered to the engine, and therefore, engine output is increased. The charge air then passes from charge air cooler into the intake manifold. The turbocharger is mounted on the exhaust outlet flange of the engine exhaust manifold.The turbocharger is mounted on the exhaust outlet flange of the engine exhaust manifold. The advantages are as follows: Increases the engine performance and torque Reduces fuel consumption compared to a similarly powered naturally aspirated engine Reduces emissions. All information subject to change without notice.

DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 11-3