Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 14. Install the turbocharger oil drain line, using a new gasket and O-ring between the opening in the bottom side of the turbocharger center housing and the drain line that runs to the cylinder block. Torque the bolts to 30-38 N·m (22-28 lb·ft). 15. Install turbocharger oil supply line. Torque line to 30 N·m (22 lb·ft). 16. Install heat shields. 17. Install compressor elbow and charge air compressor plumbing. Torque clamps to 6 N·m (4 lb·ft). All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 11-9