14.9 REMOVAL OF THE VALVE SPRING (CYLINDER HEAD REMOVED) 14.9 REMOVAL OF THE VALVE SPRING (CYLINDER HEAD REMOVED) With the cylinder head assembly removed from the engine, remove the valve springs as follows: 1. Remove the valve locks using valve spring compressor(J–47406), compressing each valve spring. 2. Release the spring and remove the valve, valve cap and valve spring. 3. Remove the valve stem oil seal and discard the seal. 4. Remove the valve spring seat. 5. As parts are removed, mark or segregate them according to their original position for possible reuse. 6.
Mark the location of each intake and exhaust valve in accordance to its cylinder number and whether it is an intake or an exhaust valve. 7. Flip the cylinder head over and carefully remove the valves from the cylinder head. All information subject to change without notice. 14-24 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION