Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 3. Install seal (1) and plastic installation tool (2) into the front cover (3) and crankshaft; remove plastic seal installation tool (2) and discard. 4. Install Front Crankshaft Seal Installer/Remover tool (W541589023300) to the crankshaft. 5. Install the seal by turning the forcing screw until the tool bottoms out on the end of the crankshaft. 6. Remove the tool and visually check the seal and sealing lip for correct installation. The seal lip should face outward when installed correctly. All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 17-19