19.2 REMOVAL OF OIL PAN 19.2 REMOVAL OF OIL PAN Remove as follows: 1. Open the oil filter and cap. 2. Remove the drain plug and drain the engine oil. 3. Remove the dipstick. 4. Loosen the dipstick tube on the oil pan. Refer to section 20.2. 5. Remove bolt at harness P-clamp on front center of oil pan. 6. Loosen the eighteen oil pan bolts. Bolts will remain installed to the pan. 7. Remove the oil pan, taking care not to damage the oil pump inlet pipe and screen. 8. Remove the oil pan seal and check for damage. All information subject to change without notice. 19-4 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION