Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

21.4 INSTALLATION OF THE OIL PUMP, OIL SUCTION MANIFOLD, AND OIL LINES 21.4 INSTALLATION OF THE OIL PUMP, OIL SUCTION MANIFOLD, AND OIL LINES Install as follows: 1. Check the oil pump part number to be sure it is correct for this application. 2. Position the oil pump on the cylinder block so that the drive gear of the oil pump meshes with the crankshaft gear. 3. Install oil pump with three bolts. Torque the bolts to 30 N·m (22 lb·ft). 4. Install oil lines with new O-rings on each end. 5. Install four bolts and secure the oil intake manifold to the cylinder block. Torque the bolts to 60 N·m (44 lb·ft). 6. Install the oil pan. Refer to section 19.7.

All information subject to change without notice. 21-6 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION