Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 22.1 DESCRIPTION AND OPERATION OF CRANKCASE BREATHER The crankcase breather is located below the turbocharger on DD Platform engines, next to the starter on the right hand side of the cylinder block. The crankcase breather has the primary task of regulating the pressure in the crankcase as well as cleaning discharged blow-by gases. The gases from the crankcase contain engine oil that can lead to adverse effects on engine emission levels. The blow-by gas produced by the engine passes into the blow-by gas inlet in the crankcase breather housing. In the housing, the blow-by gas flows to the centrifuge.

The centrifuge drive gear is driven by pressurized engine oil, causing the centrifuge to turn. The centrifugal force that is created causes the blow-by gas to be pushed against the inside wall of the housing. The engine oil contained in the blow-by gas runs along the inside wall downwards and flows to the outlet for the engine oil that has been separated back into the oil pan. The cleaned blow-by gas flows to the outlet for blow-by gas to the atmosphere. The crankcase breather is maintenance free for the working life of the component. 1. Bolt 7. Inlet Tube 2. Gasket 8. Bolt 3. Outlet Tube 9. Bolt 4. Bolt 10. Seal 5. Gasket 11. Crankcase Breather 6.

Gasket Figure 22-1 EPA07 Crankcase Breather and Related Parts All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 22-3