Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

26.5 INSTALLATION OF THE OIL THERMOSTAT 3. Install new seal, install the oil thermostat cover (1) to the oil coolant module (3) using four bolts (2). Torque the bolts to 30 N·m (22 lb·ft). 4. Connect the electrical harness to the sensor. 5. Clip electrical harness to the oil thermostat cover. All information subject to change without notice. 26-12 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION