Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 9. Close the valve and loosen the fitting; do not completely remove it from the adaptor. 10. Remove the priming adaptor (1) from the oil coolant module (2) with the line attached to keep the oil from flowing out of the module. 11. Install the allen head plug or oil sample valve to the module and torque to 70-80 N·m (51-59 lb·ft). ENGINE EXHAUST To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area. Engine exhaust is toxic. 12. Start the engine and monitor the oil pressure. 13. After the engine oil pressure stabilizes, shut the engine down and check the oil per the oil check guidelines.

All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 27-5