Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

29.2 REMOVAL OF THE WATER PUMP 29.2 REMOVAL OF THE WATER PUMP Remove as follows: 1. Drain the coolant from radiator. Refer to OEM procedures . 2. Disconnect the batteries. 3. Loosen the five bolts securing the water pump pulley to the water pump. PERSONAL INJURY To avoid injury to hands and fingers from the spring-loaded auto belt tensioner violently snapping back, do not cut the belt to remove it. 4. Remove the accessory drive belt. Refer to section 40.1. 5. Remove the five bolts (1) securing the coolant pulley (2) to the water pump (4); and remove pulley from water pump. 6. Remove nine bolts (3) from the water pump and remove from the oil coolant module (6).

All information subject to change without notice. 29-4 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION