29.4 INSTALLATION OF THE WATER PUMP 29.4 INSTALLATION OF THE WATER PUMP Install as follows: 1. Install the water pump seal (5) to the water pump (4). 2. Install the water pump (4) to the oil coolant module (6) with nine bolts (3) and torque to 30 N·m (22 lb·ft). 3. Install the water pump pulley (2) to the water pump with five bolts (1) and finger tighten and install belt. 4. Install the poly-V-belt. Refer to section 40.3. 5. Torque the water pump pulley bolts to 25 N·m (18 lb·ft). 6. Fill the coolant system. 7. Reconnect the batteries. ENGINE EXHAUST To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area. Engine exhaust is toxic. 8.
Start the engine and inspect for leaks. All information subject to change without notice. 29-6 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION