Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

32.2 INSTALLATION OF COOLANT FILTER SERVICE MODULE 32.2 INSTALLATION OF COOLANT FILTER SERVICE MODULE Install as follows: 1. Install new O-rings and seals. Lubricate with clean coolant. 2. Install Coolant Filter Service Module on the oil cooler module. 3. Install the ten bolts and torque to 37 N·m (27 lb·ft). 4. Install hoses and hose clamps. 5. Fill coolant to appropriate level. ENGINE EXHAUST To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area. Engine exhaust is toxic. 6. Start engine and check for leaks. All information subject to change without notice. 32-4 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION