Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

33.2 INSTALLATION OF THE COOLANT INLET ELBOW 33.2 INSTALLATION OF THE COOLANT INLET ELBOW Install as follows: 1. Install new O-ring. 2. Install the coolant inlet elbow to the coolant filter service module with two bolts. 3. Torque bolts to 30 N·m (22 lb·ft). 4. Fill coolant to appropriate level. ENGINE EXHAUST To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area. Engine exhaust is toxic. 5. Start engine and check for leaks. All information subject to change without notice. 33-4 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION