37.2 REMOVAL OF THE FRONT ENGINE COVER 37.2 REMOVAL OF THE FRONT ENGINE COVER Remove as follows: 1. Shut off engine, apply the parking brake, chock the wheels, and perform any other applicable safety steps. 2. Remove the poly-V-belt. Refer to section 40.1. 3. Remove the eight bolts attaching the vibration damper to the crankshaft. Refer to section 36.1. 4. Remove the splash ring. NOTE: The oil pan must be completely removed to clean the gasket and groove to prevent potential oil leaks. 5. Remove the oil pan. Refer to section 19.2. 6. Remove the ten mounting bolts attaching the front engine cover to the cylinder block and remove the front engine cover.
All information subject to change without notice. 37-4 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION