Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

37.4 INSTALLATION OF THE FRONT ENGINE COVER 37.4 INSTALLATION OF THE FRONT ENGINE COVER Install as follows: 1. Install a new front cover housing gasket on the cylinder block. 2. Install the front cover housing to the cylinder block. Torque the front cover mounting bolts to 60 N·m (44 lb·ft) in the sequence shown. 3. Install the oil pan to cylinder block. Refer to section 19.7. 4. Install the splash ring on the front of the crankshaft. 5. If the front crankshaft seal is damaged and requires replacement, replace as necessary. Refer to section 17.8. 6. Install the vibration damper and pulley to the crankshaft. Refer to section 36.2. 7. Install the poly-V-belt. Refer to section 40.3.

All information subject to change without notice. 37-6 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION