Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 38.3 REMOVAL OF THE FRONT ENGINE LIFTER BRACKET WITH FRONT ENGINE POWER TAKE-OFF For EPA07 engines, remove as follows: 1. Loosen the two hose clamps on the venturi to mixer pipe hose. 2. Slide the connector hose fully on the mixer pipe. If hose is cut, torn, or cracked, then remove and discard it. 3. Remove the two bolts attaching the venturi to the exhaust gas crossover tube/lifting eye. 4. Remove the six bolts attaching the exhaust gas crossover tube/lifting eye to the cylinder head. 5. Remove the bolt attaching the exhaust gas crossover tube/lifting eye to the coolant crossover tube. 6.

Remove the bolt attaching the coolant crossover tube to the exhaust gas crossover tube/lifting eye. 7. Slide the exhaust gas crossover tube/lifting eye off the exhaust gas connector tube and remove from engine. 8. Remove the exhaust gas connector tube from the EGR cooler. Inspect the exhaust gas connector tube for cuts, tears, or cracks or other signs of damage. If damage is found, replace connector tube. All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 38-9