EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 39.8 REMOVAL OF THE ACCESSORY MOUNTING BRACKET Remove as follows: 1. Remove the two poly-V-belts. Refer to section 40.1. 2. Remove the three bolts from the belt tensioner. 3. Remove the belt tensioner from the accessory mounting bracket. 4. Remove the air conditioner compressor. Refer to OEM procedures. 5. Remove the alternator. Refer to OEM procedures. 6. Remove the six bolts attaching the accessory mounting bracket to the engine. 7. Remove the accessory mounting bracket. All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 39-11