EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 41.1 DESCRIPTION AND OPERATION OF THE AIR COMPRESSOR The air compressor is mounted to the rear of the cylinder block on the left side of the engine. The engine provides a continuous supply of oil to the compressor. Oil is routed from the oil passage in the gear case to the compressor oil inlet. The air compressor is designed to permit direct installation of the compressor onto the gear case. Detroit Diesel offers two sizes of air compressors. The single cylinder has a displacement 360 cm 3 and the twin cylinder has a displacement 650 cm 3 . Both compressors are installed with an Energy Saving System (ESS) to save fuel. 1. Bolt 8. Gear 2. Cover 9.
Nut 3. O-ring 10. Clamp (OEM provided) 4. Coolant Return Line Assembly 11. Bolt (OEM provided) 5. Coolant Inlet Line Assembly 12. Intake Line (OEM provided) 6. Single Cylinder Air Compressor 13. Bolt 7. O-ring Figure 41-1 Single Cylinder Air Compressor and Related Parts All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 41-3