2.4 INSTALLATION OF THE CAMSHAFT AND ROCKER SHAFT/ENGINE BRAKE ASSEMBLY 22. Using Rocker Arm Lifter / Spacer (W4705589074000) for the DD13 or Rocker Arm Lifter / Spacer Intake (W470589004000) for the DD15, install the exhaust rocker shaft assembly to the camshaft cap and secure with seven clamping blocks and bolts. 23. Using the torque sequence shown below, torque the bolts to 50-55 N·m (36-41 lb·ft) +90°. 24. Remove timing tools. 25. Install the fuel injectors, if removed. Refer to section . 26. Lash the valves and engine brakes. Refer to section 14.15. 27. Install the fuel injector wiring harness. Refer to section . 28. Install the rocker cover. Refer to section 1.4. 29.
Reconnect the battery power to the engine. Refer to OEM procedures. All information subject to change without notice. 2-24 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION