Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 41.2 REMOVAL OF THE AIR COMPRESSOR 1. Disconnect the batteries. 2. Drain the coolant from radiator. Refer to OEM procedures. NOTICE: Ensure the air pressure has been released from the air lines before removing the lines from the air compressor. 3. Relieve air pressure from tanks. 4. Disconnect the air lines to and from the compressor. 5. Disconnect and drain the coolant supply and return lines at the air compressor. 6. Remove the four bolts that secure the air compressor to the cylinder block. NOTICE: Do not contact the drive gear to the engine block during removal; damage to the seal surface will cause oil leaks. 7.

Slide the air compressor forward and remove from engine. 8. Discard air compressor gasket. All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 41-5