Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

5.2 ENGINE GEAR TRAIN INSTALLATION AND TIMING 5.2 ENGINE GEAR TRAIN INSTALLATION AND TIMING Install and time the gear train as follows: NOTE: Coat the inside of the gears, bushings and gear train with clean oil before installation. 1. Install the crankshaft gear on the crankshaft. 2. Rotate the crankshaft to top dead center (TDC) on cylinder number one. Install and lock Crankshaft TDC Locating Tool (J-48630) into place with bolt. 3. Install spindle into idler gear number five. 4. Install idler gear number five onto the cylinder head using Shoulder Bolt (J-47486). 5. Install two bolts into idler gear number five and hand tighten. Remove (J-47486). Torque to 60-65 N·m (44-48 lb·ft). 6.

Install the spindle into idler gear number three. All information subject to change without notice. 5-8 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION