EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 9. Turning idler gear number five by hand will change gear lash from zero lash to maximum lash. NOTE: Rotating idler gear number five counterclockwise (viewed from front of engine) will result in zero lash. Rotating idler gear number five clockwise (viewed from front of engine) will result in maximum lash. 10. Install a magnetic base-dial indicator gauge on engine block. 11. Set the dial indicator on the number five gear tooth. All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 5-17