188 STARTING AND OPERATING Rear Cross Path View When the Trailer Reverse Steering Control (TRSC) feature (if equipped) is activated, the following buttons on the touchscreen will be unavailable: If the vehicle is in PARK, Zoom View is available until the gear selector is placed in DRIVE or REVERSE and speeds are at or above 8mph (13km/h). Pressing the Rear Cross Path soft key will give the driver a wider angle view of the rear camera system. The Top View will be disabled when this is selected. Cargo Camera NOTE: Front View Plus Top View The Front View will show you what is immediately in front of the vehicle and is always paired with the Top View of the vehicle.
Backup Camera Front Facing Camera If the vehicle is in DRIVE, NEUTRAL, or REVERSE, and speed is greater than or equal to 8mph (13km/h), Zoom View is unavailable and the icon will appear grey. Trailer Reverse Guidance Zoom View All Surround View Camera Views While in Zoom View, the guidelines will not be visible. Front Cross Path View Pressing the Front Cross Path soft key will give the driver a wider angle view of the front camera system. The Top View will be disabled when this is selected. When the Rear View Camera image is being displayed, and the vehicle speed is below 8mph (13km/h) while in any gear, Zoom View is available.
By pressing the “magnifying glass” icon in the upper left of the display screen, the image will zoom in two times the standard view. Pressing the icon a second time will return the view to the standard Back Up Camera display. Deactivation The system is deactivated in the following conditions if it was activated automatically: Back Up Camera View When the vehicle is shifted out of REVERSE (with camera delay turned on), the camera image will continue to be displayed for up to 10 seconds after shifting out of REVERSE unless the vehicle speed exceeds 8mph (13km/h), the vehicle is shifted into PARK or the ignition is placed in the OFF position.
There is a touchscreen button “X” to disable the display of the camera image. Pressing the Back Up Camera soft key will provide a full screen rear view with Zoom View. NOTE: When Zoom View is selected while the vehicle is in REVERSE, then shifted to DRIVE, the camera delay view will display the standard Back Up Camera view. If the vehicle is then returned to REVERSE gear from DRIVE, the Zoom View selection will automatically resume. If the Rear View was selected through the Surround View Camera menu, exiting out of the Rear View screen will return to the Surround View menu.
If the Back Up Camera was manu ally activated through the Controls menu of the Uconnect system, exiting out of the display screen will return to the Controls menu. When the vehicle is shifted out of REVERSE (with camera delay turned off), the Surround View Camera mode is exited and the last known screen appears again. Shifting to NEUTRAL from any gear will maintain the selected view (Zoom or Standard) as long as the vehicle is below 8mph (13km/h).