246 MULTIMEDIA Setting Presets The Presets are available for all Radio Modes, and are activated by pressing any of the Preset buttons, located at the top of the screen. Audio Settings Press the Audio button within the settings main menu to activate the Audio Settings screen. When you are on a station that you wish to save as a preset, press and hold the numbered button on the touchscreen for more than two seconds. The Radio stores up to 12 presets in each of the Radio Modes. For the Uconnect 3 With 5-inch Display A set of four presets will appear on the screen. Press the All button to view all saved presets. To remove a saved preset, a new preset must be saved over the old one.
Uconnect 3 With 5-inch Display Radio Presets Uconnect 3 With 5-inch Display Audio Setting Description Balance/Fade Press the Balance/Fade button on the touchscreen to balance audio between the front speakers or fade the audio between the rear and front speakers. Press the Front, Rear, Left or Right buttons or press and drag the red Speaker icon to adjust the Balance/Fade. Equalizer Press the + or – buttons or press and drag the level bar to increase or decrease each of the equalizer bands. The level value, which spans between plus or minus nine, is displayed at the top of each of the bands.
Speed Adjusted Volume The Speed Adjusted Volume is adjusted by selecting from “Off”, “1”, “2”, and “3”. This alters the automatic adjustment of the audio volume with variation to vehicle speed. Volume increases automatically as speed increases to compensate for normal road noise.