RAM 1500 — Pair (Link) Uconnect Phone To A Mobile Phone

MULTIMEDIA 253 phone is currently connected with the system, this pop-up will not appear. 6. Uconnect Phone will display an in-progress screen while the system is connecting. 3. Select “Yes” to begin the pairing process. 7. When your mobile phone finds the Uconnect system, select “Uconnect.” 4. Search for available devices on your Bluetooth®-enabled mobile phone. 8. When prompted on the mobile phone, accept the connection request from Uconnect. Press the Settings button on your mobile phone. 9. When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite phone. Selecting “Yes” will make this phone the highest priority.

This phone will take precedence over other paired phones within range and will connect to the Uconnect system automatically when entering the vehicle. Only one mobile phone and/or one Bluetooth® audio device can be connected to the Uconnect system at a time. If “No” is selected, simply select “Uconnect” from the mobile phone/audio device Bluetooth® screen, and the Uconnect system will reconnect to the Bluetooth® device. Select “Bluetooth®” and ensure it is enabled. Once enabled, the mobile phone will begin to search for Bluetooth® connec­ tions. Uconnect 3 With 5-inch Display NOTE: You must have Bluetooth® enabled on your phone to complete this procedure. NOTE:

During the pairing procedure, you may receive a pop-up on your touchscreen asking you to make sure the PIN on the touchscreen matches the PIN from the pop-up on your mobile phone. 5. If “No” is selected, and you still would like to pair a mobile phone, press the Pairing or Settings button from the Uconnect Phone main screen. 5 The vehicle must be in PARK or at a standstill. Follow the steps below to pair your phone: 1. Place the ignition in the ACC or ON/RUN position. 2. Press the Phone button. NOTE: If there are no phones currently connected with the system, a pop-up will appear asking if you would like to pair a mobile phone. Press the Paired Phones button or the Add Device button. NOTE:

For phones which are not made a favorite, the phone priority is determined by the order in which it was paired. The most recent phone paired will have the higher priority. Search for available devices on your Bluetooth®-enabled mobile phone (see below). When prompted on the phone, select “Uconnect” and accept the connec­ tion request. This pop-up only appears when the user enters Phone Mode and no other device(s) have previously been paired. If the system has a phone previously paired, even if no