300 SAFETY WARNING! active braking, or additional brake support if the driver is not braking adequately in the event of a potential frontal collision. “Only Warning”, this allows the system to warn the driver of a possible collision with the vehicle in front using audible/visual warnings. Forward Collision Warning (FCW) is not intended to avoid a collision on its own, nor can FCW detect every type of potential collision. The driver has the responsibility to avoid a collision by controlling the vehicle via braking and steering. Failure to follow this warning could lead to serious injury or death.
When FCW status is set to “Warning and Braking”, this allows the system to warn the driver of a possible collision with the vehicle in front using audible/visual warnings and it applies autonomous braking. Near When the sensitivity of FCW is set to the “Near” setting and the system status is “Only Warning”, this allows the system to warn the driver of a possible closer collision with the vehicle in front using audible/ visual warnings. The FCW system state is defaulted to “Full On” from one ignition cycle to the next. If the system is turned off, it will reset to “Full On” when the vehicle is restarted.
FCW Braking Status And Sensitivity Turning FCW On or Off The FCW button is located in the Uconnect display in the control settings Ъ page216. This setting provides less reaction time than the “Far” and “Medium” settings, which allows for a more dynamic driving experience. To turn the FCW system on, press the forward collision button once. The FCW Sensitivity and Active Braking status are programmable through the Uconnect system Ъ page216. More dynamic or aggressive drivers that want to avoid frequent warnings may prefer this setting. FCW Limited Warning To turn the FCW system off, press the forward collision button once. NOTE:
Far When the sensitivity of FCW is set to the “Far” setting and the system status is “Only Warning”, this allows the system to warn the driver of a possible more distant collision with the vehicle in front using audible/ visual warnings. When the FCW is “on”, this allows the system to warn the driver of a possible collision with the vehicle in front. If the instrument cluster displays “ACC/FCW Limited Functionality” or “ACC/FCW Limited Functionality Clean Front Windshield” momentarily, there may be a condition that limits FCW functionality. Although the vehicle is still driveable under normal conditions, the active braking may not be fully available.
Once the condition that limited the system performance is no longer present, the system will return to its full performance state. If the problem persists, see an authorized dealer. When the FCW is “off”, this prevents the system from warning the driver of a possible collision with the vehicle in front. If the FCW is set to “off”, “FCW OFF” will be displayed in the instrument cluster display. More cautious drivers that do not mind frequent warnings may prefer this setting. Medium When FCW status is set to “Only Warning”, this prevents the system from providing limited When the sensitivity of FCW is set to the “Medium” setting and the system status is