RAM 1500 — Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle

334 SAFETY WARNING! The seat belts in the passenger seating positions are equipped with a Switchable Automatic Locking Retractor (ALR) that is designed to keep the lap portion of the seat belt tight around the child restraint so that it is not necessary to use a locking clip. The ALR retractor can be “switched” into a locked mode by pulling all of the webbing out of the retractor and then letting the webbing retract back into the retractor. If it is locked, the ALR will make a clicking noise while the webbing is pulled back into the retractor.

Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle Child restraint anchorages are designed to withstand only those loads imposed by correctly-fitted child restraints. Under no circumstances are they to be used for adult seat belts, harnesses, or for attaching other items or equipment to the vehicle. Installing Child Restraints Using The Vehicle Seat Belt Child restraint systems are designed to be secured in vehicle seats by lap belts or the lap belt portion of a lap/shoulder belt. See the “Automatic Locking Mode” description Ъ ­page­313 for additional information on ALR. Please see the table below and the following sections for more information.

Automatic Locking Retractor — (ALR) Locations (All models) WARNING!­ ALR — Switchable Automatic Locking Retractor Top Tether Anchorage Symbol Improper installation or failure to properly secure a child restraint can lead to failure of the restraint. The child could be badly injured or killed. Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint.