SERVICING AND MAINTENANCE 427 What Causes Corrosion? Tri-Fold Soft Tonneau Cover Care CAUTION! Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. For cleaning and protecting the vinyl Tri-Fold Tonneau cover, use Mopar® Whitewall & Vinyl Top Cleaner and Mopar® Leather and Vinyl Conditioner/Protectant. P RESERVING T HE B ODYWORK Use of power washers exceeding 1,200 psi The most common causes are: (8,274 kPa) can result in damage or removal of paint and decals. Road salt, dirt and moisture accumulation. Stone and gravel impact. Fascia/Bumper Care Insects, tree sap and tar. Salt in the air near seacoast localities.
Washing Wash your vehicle regularly. Always wash your vehicle in the shade using Mopar® Car Wash, or a mild car wash soap, and rinse the panels completely with water. The customer is responsible to clean and maintain the chrome components of the vehicle. Wash away road debris and salt using an automotive soap. Fascia/bumpers should be cleaned regularly using mild (neutral Ph) soap and water to maintain their luster and to prevent corrosion. Atmospheric fallout/industrial pollutants. B ODY A ND U NDERBODY M AINTENANCE Cleaning Headlights Your vehicle is equipped with plastic headlights and fog lights that are lighter and less susceptible to stone breakage than glass headlights.
If insects, tar, or other similar deposits have accumulated on your vehicle, use Mopar® Super Kleen Bug and Tar Remover to remove. Your fascia/bumpers are susceptible to deterioration caused by salt, sodium chloride, magnesium chloride, calcium chloride, etc., and other road chemicals used to melt ice or control dust on dirt roads. Do not use harsh chemicals or a stiff brush. They can stain or damage the protective coating that helps keep them from corroding and tarnishing. Use a high quality cleaner wax, such as Mopar® Cleaner Wax to remove road film, stains and to protect your paint finish. Use precautions to not scratch the paint.
Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed. To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution followed by rinsing. Avoid using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. 8 Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses. CAUTION! Do not use abrasive or strong cleaning mate rials such as steel wool or scouring powder that will scratch metal and painted surfaces. (Continued)