SERVICING AND MAINTENANCE 429 Repairing The Spray-On Bedliner Stain Repel Fabric Cleaning Procedure — If Equipped Seat Belt Maintenance While extremely tough, it is possible to damage a Spray-On Bedliner. One common condition is when loading a heavy pallet and dragging that pallet across the floor of the bed. If a nail or sharp point is exposed under the weight of the pallet a scratch or tear is possible. While not covered by your new vehicle warranty, a cosmetic fix to cover the metal exposed by the scratch is required. To repair a tear or gouge, follow the directions provided in the Mopar® Quick Repair Kit. INTERIORS Stain Repel seats may be cleaned in the following manner:
Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. If the belts need cleaning, use a mild soap solution or lukewarm water. Do not remove the belts from the vehicle to wash them. Dry with a soft cloth. Remove as much of the stain as possible by blotting with a clean, dry towel. Blot any remaining stain with a clean, damp towel. Sun damage can also weaken the fabric. Replace the belts if they appear frayed or worn or if the buckles do not work properly. For tough stains, apply Mopar® Total Clean, or a mild soap solution to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. NOTE:
If the belts retract slowly, inspect the upper turning loop for soiling. If soiling is present, clean with a wet soft cloth until all residue is removed. S EATS A ND F ABRIC P ARTS For grease stains, apply Mopar® Multi-Purpose Cleaner to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. Use Mopar® Total Clean to clean fabric upholstery and carpeting. WARNING! WARNING! Do not use any harsh solvents or any other form of protectants on Stain Repel products. A frayed or torn seat belt could rip apart in a col lision and leave you with no protection. Inspect the seat belt system periodically, checking for cuts, frays, or loose parts.
Damaged parts must be replaced immediately. Do not disassemble or modify the seat belt system. If your vehicle is involved in a collision, or if you have questions regarding seat belt or retractor conditions, take your vehicle to an authorized FCA dealer or authorized FCA Certified Collision Care Program facility for inspection. Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. 8