RAM 1500 — Torque Specifications

431 TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER (VIN) BRAKE SYSTEM WHEEL AND TIRE TORQUE SPECIFICATIONS The VIN is found on the left front corner of the instrument panel, visible through the windshield. If power assist is lost for any reason (for example, repeated brake applications with the engine off), the brakes will still function. However, you will experience a substantial increase in braking effort to stop the vehicle. Proper lug nut/bolt torque is very important to ensure that the wheel is properly mounted to the vehicle.

Any time a wheel has been removed and reinstalled on the vehicle, the lug nuts/bolts should be torqued using a properly calibrated torque wrench using a six-sided (hex) deep wall socket. T ORQUE S PECIFICATIONS If either the front or rear hydraulic systems lose normal braking capability, the remaining system will still function with some loss of overall braking effectiveness. This will be evident by increased pedal travel during application, greater pedal force required to slow or stop, and the Brake Warning Light and the ABS Warning Light will activate during brake use. Vehicle Identification Number NOTE: It is illegal to remove or alter the VIN.

**Use only authorized dealer recommended lug nuts/ bolts and clean or remove any dirt or oil before tightening. NOTE: Do not oil wheel studs. For chrome wheels, do not substitute with chrome plated wheel nuts. 9 Lug Nut/ Bolt Torque Lug Nut/ Bolt Type **Lug Nut/Bolt Size Lug Nut/ Bolt Socket Size 130 Ft-Lb (176­N·m) Cone M14 x 1.50 22­mm