TECHNICAL SPECIFICATIONS 439 9 Component Fluid, Lubricant, or Genuine Part Diesel Engine Coolant We recommend you use Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000km) Formula OAT (Organic Additive Technology). Engine Oil — 3.0L Turbo Diesel Engine We recommend you use 5W-40 synthetic engine oil such as Mopar® that meets the manufacturer Material Standard MS-12991 and the API SN engine oil category is required. Diesel Engine Oil Filter We recommend you use Mopar® engine oil filters. Using an oil filter that does not meet the manufacturer’s filtration requirements can severely impact engine life and reliability.
Fuel Filters — 3.0L Turbo Diesel Engine We recommend you use Mopar® fuel filter. Must meet 3micron rating. Using a fuel filter that does not meet the manufacturer’s filtration and water sepa rating requirements can severely impact fuel system life and reliability. Under normal conditions the diesel fuel filter should be replaced every 20,000miles (32,000km) (every other oil change).
If the vehicle is being used in severe operating conditions, or In certain geographical areas of the country (Pennsylvania, New York, Ohio, Maryland, West Virginia, Arkansas, Oklahoma, Kansas, Iowa, Missouri and Nebraska) due to fuel cleanliness issues, it’s recommended to replace the fuel filter every 10,000miles (16,000km).