88 GETTING TO KNOW YOUR VEHICLE The Instrument Panel Power Inverter switch is only found on vehicles equipped with a RamBox. The switch only controls on/off operation of the power outlet in the RamBox; it does not control on/off operation of the power outlets located inside the cabin of the vehicle. WARNING! Do not allow children to have access to the storage bins. Once in the storage bin, young children may not be able to escape. If trapped in the storage bin, children can die from suffo cation or heat stroke. In an accident, serious injury could result if the storage bin covers are not properly latched. Do not drive the vehicle with the storage bin covers open.
Emergency Release Lever Keep the storage bin covers closed and latched while the vehicle is in motion. B ED D IVIDER — I F E QUIPPED Do not use a storage bin latch as a tie-down. The bed divider has two functional positions: Divider Position Instrument Panel Power Inverter Switch RamBox Emergency Release Lever Storage Position Divider Position R AM B OX S AFETY W ARNING As a security measure, an Emergency Release Lever is built into the storage bin cover latching mechanism. The divider position is intended for managing your cargo and assisting in keeping cargo from moving around the bed.
There are 11 divider slots along the bed inner panels which allow for various positions to assist in managing your cargo. Carefully follow these warnings to help prevent personal injury or damage to your vehicle: WARNING! In the event of an individual being locked inside the storage bin, the storage bin cover can be opened from inside of the bin by pulling on the glow-in-the-dark lever attached to the storage bin cover latching mechanism. Always close the storage bin covers when your vehicle is unattended. To install the bed divider into a divider position, perform the following: (Continued)