94 GETTING TO KNOW YOUR VEHICLE T RI -F OLD T ONNEAU C OVER I NSTALLATION To install the Tonneau Cover follow these steps: 1. Position the Tonneau Cover on the truck bed and center using the locating bumpers. 2. Locate the front pair of Tonneau Cover latches on the underside of the Cover. Slide the locking lever toward the inside of the truck bed and release the latch from the stowed position, and pull the handle downward into the released position. Do this for both the left and right side. Released Position Slide Locking Lever Towards Inside Of Truck Hold The Bumper And Push The Handle Up Unlatching Latch 8. Holding the bumper, push the fully released latch to the center and push up.
Push the handle firmly, locking it into the stowed position. Repeat Steps 2 & 3 for the opposite side latch. Location of Front Latches 9. With two people, remove the cover.