Bobcat 325/328 Excavator — 6902610-325-328 om 3-06(8).book

DIAGNOSTICS SERVICE CODE Number Codes List 325/328 Excavator 93 Operation and Maintenance Manual CODE CODE 02-16 Hydraulic charge filter not connected 20-02 Two speed output error ON 02-17 Hydraulic charge filter plugged 20-03 Two speed output error OFF 03-09 Battery voltage low 21-02 Glow plug output error ON 03-10 Battery voltage high 21-03 Glow plug output error OFF 03-11 Battery voltage extremely high 03-14 Battery voltage extremely low 22-02 Starter relay output error ON 03-22 Battery voltage out of range low 22-03 Starter relay output error OFF 04-14 Oil pressure extremely low 26-02 Front base output error ON 04-15 Oil pressure shutdown level 26-03 Front base output error OFF 05-09 Hydraulic charge pressure low 27-02 Front rod output error ON 05-14 Hydraulic charge pressure extremely low 27-03 Front rod output error OFF 05-15 Hydraulic charge pressure shutdown level 05-21 Hydraulic charge pressure out of range high 28-02 Diverter output error ON 05-22 Hydraulic charge pressure out of range low 28-03 Diverter output error OFF 06-10 Engine speed high 30-28 Watch dog failure 06-11 Engine speed extremely high 06-15 Engine speed shutdown level 31-28 Recovery mode failure 06-18 Engine speed out of range high 33-23 Controller not calibrated 07-10 Hydraulic oil temperature high 07-11 Hydraulic oil temperature extremely high 07-15 Hydraulic oil temperature shutdown level 60-21 Sec.

aux. thumbswitch out of range high 07-21 Hydraulic oil temperature out of range high 60-22 Sec. aux. thumbswitch out of range low 07-22 Hydraulic oil temperature out of range low 60-23 Sec. aux. thumbswitch not calibrated 08-10 Engine coolant temperature high 62-04 Load moment monitoring in error 08-11 Engine coolant temperature extremely high 08-15 Engine coolant temperature shutdown level 63-05 Work group/drive console sensor 08-21 Engine coolant temperature out of range high 63-06 Work group/drive console sensor 08-22 Engine coolant temperature out of range low 64-05 Switched power/acc. relay short to battery 09-09 Fuel level low 64-06 Switched power/acc.

relay short to ground 09-21 Fuel level out of range high 64-07 Switched power/acc.

relay open circuit 09-22 Fuel level out of range low 65-02 Work group/drive lockout solenoid error ON 12-21 Primary auxiliary PWM switch out of range high 65-03 Work group/drive lockout solenoid error OFF 12-22 Primary auxiliary PWM switch out of range low 65-05 Work group/drive lockout solenoid short to battery 12-23 primary auxiliary PWM switch not calibrated 65-06 Work group/drive lockout solenoid short to ground 65-07 Work group/drive lockout solenoid open circuit 13-05 Fuel shut-off hold solenoid short to battery 13-06 Fuel shut-off hold solenoid short to ground 66-05 Drive solenoid short to battery 66-06 Drive solenoid short to ground 14-02 Fuel shut-off hold solenoid short to batter 14-03 Fuel shut-off hold solenoid short to ground