Engine Electrical Hydraulic System 325/328 Excavator 111 Operation and Maintenance Manual Make / model Kubota / D1703-M-E2B-BC-1 Fuel Diesel Cooling Liquid Maximum power at 2200 RPM (ISO 9249) 20.6 kW Maximum governed speed 2200 RPM High idle speed 2420 RPM Low idle speed 1325–1375 RPM Torque at 1600 RPM (ISO 9249) 103.4 Nm Number of cylinders 3 Displacement 1.7 l Bore 87 mm Stroke 92.4 mm Lubrication Pressure system with full-flow filter Crankcase ventilation Closed breathing Air filter Dry replaceable paper cartridge with safety element Ignition Diesel-compression Starting aid Intake air heater Alternator 12 V — 40 A — open frame with internal regulator Battery 12 V — 500 cold cranking A at -18°C — 75 min reserve capacity Starter 12 V — gear reduction type — 1.4 kW Pump type Dual-outlet variable displacement piston pump with gear pump Pump 1 capacity 26.6 l/min at 2200 RPM Pump 2 and 3 capacity 19.8 l/min at 2200 RPM System relief pressure for implement circuits 172 bar System relief pressure for travel circuits 263 bar System relief pressure for slew circuits 117 bar System relief pressure for auxiliary circuits 172 bar Dipperstick port relief base and rod end 290 bar Boom port relief base and rod end 290 bar Bucket port relief base and rod end 290 bar Main hydraulic filter bypass 3.4 bar Case drain bypass 1.4 bar Control valve Ten-spool parallel series Hydraulic filter Full-flow replaceable — 3 µm synthetic media element Fluid lines SAE standard tubelines, hoses, and fittings Auxiliary flow 46.4 l/min