ATTACHMENTS (CONT’D) Figure OI-85 Using The X-Change System (Cont’d) Installing Bucket Or Attachment (X-Change System) WARNING Never use attachments or buckets which are not approved by Bobcat Company. Buckets and attachments for safe loads of specified densities are approved for each model. Unapproved attachments can cause injury or death. 2 1 W-2052-0500 P19395 Figure OI-84 Raise the boom until the pins (Item 1) engage the hooks (Item 2) [Figure OI-85] on the bucket. Figure OI-86 P19394 Fully retract the bucket cylinder to release the latch on the X-Change [Figure OI-84] . P19397 Move the arm towards the bucket.
Lift the boom and extend the bucket cylinder until the bucket is in the position shown [Figure OI-86] . 325/328 Excavator Operation and Maintenance Manual 38