Bobcat 325/328 Excavator — 6902610-325-328 om 3-06(8).book

OPERATING PROCEDURE (CONT’D) Figure OI-109 Backfilling Figure OI-107 The bucket can also be used to pull the excavator. Raise the blade, extend the arm and lower the boom. Operate the boom and arm in a digging manner [Figure OI-109] . Use the blade to backfill the trench or hole after excavating [Figure OI-107] . Driving The Excavator When operating on uneven ground, operate as slowly as possible and avoid sudden changes in direction. Avoid driving over objects such as rocks, trees, stumps, etc. When working on wet or soft ground, put planks on the ground to provide a solid base to drive on and prevent the excavator from becoming stuck.

Figure OI-108 Plank B-19963 If one or both tracks have become stuck in soft or wet ground, raise one track at a time by turning the upperstructure and pushing the bucket against the ground [Figure OI-108] . Put planks under the tracks and drive the excavator to dry ground. 325/328 Excavator 47 Operation and Maintenance Manual B-19939 B-19939 B-19940 B-19940