General Safety Instructions R2.8 CM2220 R101B Page i-14 Section i - Introduction Avoid stirring up exhaust particulate dust. Avoid inhalation of exhaust particulate dust. Wear a dust mask. If respiratory irritation or discomfort occurs, leave the dusty area. Utilize breathing assistance or oxygen if necessary. Elevated concentrations of metals in the form of dust, soot, and contaminants are contained in these filters. Health regulations may exist for the materials found in these filters such as Zinc, Molybdenum, polynuclear aromatic hydrocarbons. Potentially toxic materials found in these filters are oxides of calcium, zinc, phosphorous, silicon, sulfur, and iron.
Proper disposal of the exhaust dust and filter are required. Dispose of in accordance with local and environmental regulations. Diesel particulate filter maintenance must be completed by appropriately trained personnel. Selective Catalytic Reduction (SCR) Catalyst Protect eyes. Protect skin. Avoid stirring up exhaust catalyst dust. Avoid inhalation of exhaust catalyst dust. Wear a dust mask. If respiratory irritation or discomfort occurs, leave the dusty area. Utilize breathing assistance or oxygen if necessary. Do not cut open exhaust catalyst assemblies. Proper disposal of the exhaust catalyst is required. Dispose of in accordance with local and environmental regulations.
Oxidation Catalysts Types of Oxidation Catalysts may include, but are not limited to the following. Diesel Oxidation Catalyst (DOC) 3-way Oxidation Catalyst When working with oxidation catalysts, perform the following. Protect eyes. Protect skin. Avoid stirring up exhaust catalyst dust. Avoid inhalation of exhaust catalyst dust. Wear a dust mask. If respiratory irritation or discomfort occurs, leave the dusty area. Utilize breathing assistance or oxygen if necessary. Do not cut open exhaust catalyst assemblies. Common Substances Follow these recommended practices when interacting with the following substances.
For information regarding proper handling of various substances, refer to the manufacturer's safety data sheet. Coolant Coolant is also referred to as antifreeze. Protect eyes. In case of contact with eyes, flush with water for a minimum of 15 minutes. Receive medical attention immediately. Protect skin. In case of contact with skin, wash with soap and water. Remove contaminated clothing. If injection occurs, it is a medical emergency. Receive medical attention immediately. Do not ingest. If ingested, drink excess water for dilution and seek medical attention.
Do not pour used antifreeze into containers that have been used to store other chemicals or products, such as oil or gasoline, unless they have been thoroughly cleaned. If material is spilled, avoid contact and dispersal with runoff, soil, waterways, drains, and sewers. Provide adequate ventilation to the area. Absorb with sand, clay, or commercial absorbent. Transfer to containers and neutralize the material. Flush spill area with soap and excess water. Report spills effecting water source contamination to local authorities immediately. Proper disposal is required. Dispose of in accordance with local and environmental regulations.
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com