Cummins® Product Technology R2.8 CM2220 R101B Page E-8 Section E - Engine and System Identification Cummins® Product Technology General Information The service model name for this product is R2.8 CM2220 R101B. Additional Product Description: Crate Engine This engine is being released to meet the following emission regulations: Engine has demonstrated through the testing procedures prescribed in 40 CFR Part 86 to meet EPA’s Tier 0 (LDT 1 and 2) and Tier 1 (LDT 2 weighing less than 4000 lb complete weight) emissions standards. This means that the engine generally is suitable for model year 1999 or earlier light duty trucks.
However, the suitability of the engine to any vehicle is the responsibility of the installer and may depend on state or area laws. Installation of this engine in a vehicle for which it is not intended may violate U.S. and Canadian laws and regulations related to motor vehicle emissions. Check your state and local emissions requirements before purchasing. The Control Parts List(s) (CPL) associated with this product are: 5290 EPA Product: This engine has the following Agency defined Emissions Control System (ECS) hardware, which can also be found on the engine dataplate. Use the following procedure for the location of the engine dataplate. Refer to Procedure 100-001 in Section E.
Charge-Air Cooler (CAC) Direct Diesel Injection (DDI) Engine Control Module (ECM) Exhaust Gas Recirculation (EGR) Turbocharger (TC) Oxidation Catalyst (OC) This engine uses the following product technology: Engine Number of Cylinders: 4 Engine Configuration Engine Orientation Inline Vertical Cylinder Block Material Cast Iron Cylinder Head Material Cast Iron Valves Per Cylinder Exhaust Quantity: 2 Intake Quantity: 2 Camshaft Location Cylinder Head Camshaft Followers/Tappets Roller Followers/Tappets Primary Gear Train Location Crankcase Ventilation System Rear of the Engine Closed To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com