R2.8 CM2220 R101B Engine Mounting Section 1 - Installation by Subsystem Page 1-3 Figure 3 - Crankcase/Driveline to Engine Mounts Alignment 1 Approximate height from crankshaft centerline to bottom of lubricating oil pan - 212 mm [8.3 in] 2 Crankshaft centerline to lower motor mount bolt centerline - 0 mm [0 in] The dry engine weight is approximately 229 kg [505 lbs]. It is recommended to use a three-point engine-to-vehicle frame mounting system on the R2.8 CM2220 R101B engine and mating transmission, utilizing two engine mount/isolators on either side of the engine block and one at the driveshaft end of the transmission. See Figure 4.
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com