How to Use the Installation Guide R2.8 CM2220 R101B Page i-2 Section i - Introduction How to Use the Installation Guide General Information This Installation Guide is utilized to provide information on preparing and installing the R2.8 CM2220 R101B engine. Thoroughly read this installation guide before installing the engine in the vehicle. Should you feel uncomfortable completing any of the necessary tasks, it is highly recommended you confer with a capable individual, or contact a Cummins® Authorized Repair Location. The following information is contained in this guide: Section i contains general safety and cleaning instructions that should be followed.
Section E contains an overview of the engine, kit or crate contents, and diagrams of the engine and other components. Section 1 provides a guide to prepare and install the engine and integrate it into the vehicle chassis, by subsystem. Section 2 provides guidelines for the initial startup of the engine after installation. Section V contains Maintenance specifications. Safety Precautions Working on and around vehicles and engines can be hazardous. These hazards, such as pinch points, hot surfaces, high electrical currents, sharp edges, and heavy components will be encountered, along with others not specified.
Personal protective equipment must be considered when performing many tasks on the engine or vehicle. Personal protective equipment such as, but not limited to, eye protection, steel toe shoes, and mechanic gloves, must be worn. Securing the vehicle that is to be worked on is critical. Do not work under an engine or vehicle that is not properly supported. Refer to Procedure 204-006 in Section i, General Safety Instructions, before beginning the installation. To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com