Cummins — Cummins CM2220 R2.8 Installation Guide R101B

Steering and Braking R2.8 CM2220 R101B Page 1-30 Section 1 - Installation by Subsystem Figure 2 - Exhaust System 1 Solid-mounted exhaust system 2 Muffler 3 Flex section 4 DOC 5 Hanging exhaust system 6 Rubber donut hangers 7 Muffler. Figure 2 shows the use of a flex section (3) with a solid-mounted exhaust system (1). A flex section is not necessary if isolating the exhaust system with rubber hangers (6). The exhaust system back pressure, as measured at the DOC outlet flange, can not exceed specifications. Refer to Procedure 018-020 in Section V for specifications. The larger the exhaust pipe diameter with the fewest number of bends will better the performance of the engine.

Steering and Braking (391-004) General Information The belt-driven pump for power steering is provided with the engine assembly. Its performance data is shown in Figure 1. To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com